Airsoft 25rd Gas Mag Magazine for M1911 Gbb Pistol Army Tokyo Marui Compatible

Gas Magazines

( number of products: 95 )

New

Wykonanie: Stal + tworzywo
Waga: 184g.
Kolor: Czarny + Róż
Przeznaczenie: Tokyo Marui - Vorpal Bunny
Producent: Tokyo Marui

38,06 € / pcs

Vorpal Bunny mag

95,50 € / pcs

Przeznaczenie: GPM92/GPM1911/GPM MK3/GTP9
Wykonanie: metal
Waga: 280g
Pojemność: 27 kulek
Kolor: czarny
Zasilanie: Light-green Gas
Producent: M&G

35,06 € / pcs

27BBs Green Gas mag for GMP92

Purpose: Px4 Tokyo Marui replicas
Cloth: Metal + polymer
Power Source: Light-green Gas
Chapters: 25 Bbs
Type: Low-Cap
Weight: 265 g
Color: Black
Manufacturer: Tokyo Marui

36,91 € / pcs

Px4 Tokyo Marui 25 BB Gas Magazine

Gas-powered airsoft replicas are peculiarly pop among players who are focused on realism, as well as those bored with classic AEGs. Before buying a gas replica of your dreams, you should find out what the characteristics of the magazines that feed it are.

Green gas magazines

The construction of green gas-powered magazines significantly differs from the ones used in electric replicas. In addition to the channel, which holds the bullets, gas magazines have a tank, which contains gas, along with ii valves - the lower one, through which the gas is loaded, and the upper one, which is responsible for transferring the proper dose of gas to the replica mechanism. Due to the design, most gas magazines for replicas have a capacity non exceeding 50 rounds.

CO2 capsules-magazines

Magazines for replicas powered by CO2 capsules differ just in the way they are fed with gas. Green gas magazines are loaded directly from the bottle, while CO2 magazines use 12g-capsules that are replaced. To do this, you need to insert the capsule into the designated space, and and then with a quick and decisive paw movement tighten the screw. Tightening the capsule too slowly or not tight enough can cause a leak, through which all the gas from the capsule will escape.

CO2 magazines are unremarkably interchangeable with green gas magazines. It should be remembered, yet, that dark-green gas gives more ability, which may result in faster wear of the replica'southward mechanism.

Maintenance of replicas and gas magazines

Gas replicas are much more than susceptible to getting muddy, usually translating into jamming of the replica. Gas magazines, therefore, require a little more attending during maintenance. The only amanuensis suitable for this purpose is silicone oil, which should be applied in small amounts on the moving parts of the replica mechanism, as well equally on the valves in the magazines. It is important to remember that excess lubricant harms the replica as much, and sometimes more than, as its absence. If silicone oil gets into the barrel or HU chamber, it may disturb the operation of the Hop-Upwardly system, which translates into a worse range and repeatability of shots.

Accessories for gas magazines

Most magazines loaded with light-green gas take valved at the bottom of the magazine. To reduce the entry of contaminants, manufacturers ofttimes place the nozzle in a recess, which makes it extremely hard to load the magazine. The remedy for this trouble is the gas charging nozzle extension. This inconspicuous gadget, weighing only 5 grams, is null more than a properly rolled tube, which volition facilitate access to the valves of the mag.